Plumber in Hillsboro Beach, FL

This is one of the most common - and most urgent - situations we encounter. What you're likely dealing with is a slow, steady pinhole leak or a sweating pipe that's been dripping into the wall cavity over time. By the time drywall is visibly wet or discolored, significant moisture has usually accumulated inside the wall, and mold begins growing within 24–72 hours of water intrusion. We use moisture meters, thermal imaging cameras, and pressure testing to find these hidden leaks without tearing out entire sections of drywall. The sooner you call, the less remediation you'll need.

Not necessarily, but you're in the high-risk window. Most 40–50 gallon tank water heaters last 8–12 years. At 11 years, the internal anode rod that prevents tank corrosion has likely deteriorated, meaning your tank is now actively corroding from the inside. Signs it's near the end: you hear popping or rumbling (sediment buildup on heating elements), you get rusty or smelly hot water, or the base of the tank shows any sign of moisture or rust. We recommend a flush and inspection - if the tank is structurally sound, we can extend its life. If not, we'll show you your replacement options with honest pricing.

We use flat-rate pricing, which means we give you a written quote before any work starts. A service call and diagnostic typically runs $89–$129. Drain cleaning ranges from $150–$300 depending on the blockage and method. Water heater replacement averages $800–$1,800 installed depending on unit type. Full home repiping is typically $4,000–$12,000 depending on house size. These prices don't change based on how long the job takes - what we quote is what you pay. We never add surprise fees after the fact.

Yes, and the fix is very different. Low pressure at just one faucet almost always means a clogged aerator (the small mesh screen at the faucet tip) or a partially closed isolation valve under the sink - both are quick, inexpensive fixes. Low water pressure throughout the entire house is a more significant issue: it can indicate a failing pressure reducing valve (PRV), significant internal corrosion narrowing your main supply line, a partially closed main shutoff valve, or in older homes, widespread galvanized pipe deterioration. We'll check pressure at multiple points to diagnose which situation you're dealing with.