Plumber in Arrow Point, MO

Not always. We offer two main approaches: traditional open-cut excavation (which is sometimes the best option for severely deteriorated lines or collapsed pipes), and trenchless methods that don't require major digging. The most common trenchless technique is pipe lining - we thread a flexible liner coated with epoxy through your existing sewer pipe, inflate it, and cure it in place, creating a new pipe inside the old one. This saves your landscaping, driveway, and the cost of restoration. We always perform a camera inspection first to determine which approach is right for your specific situation.

Not necessarily, but you're in the high-risk window. Most 40–50 gallon tank water heaters last 8–12 years. At 11 years, the internal anode rod that prevents tank corrosion has likely deteriorated, meaning your tank is now actively corroding from the inside. Signs it's near the end: you hear popping or rumbling (sediment buildup on heating elements), you get rusty or smelly hot water, or the base of the tank shows any sign of moisture or rust. We recommend a flush and inspection - if the tank is structurally sound, we can extend its life. If not, we'll show you your replacement options with honest pricing.

Yes, and the fix is very different. Low pressure at just one faucet almost always means a clogged aerator (the small mesh screen at the faucet tip) or a partially closed isolation valve under the sink - both are quick, inexpensive fixes. Low water pressure throughout the entire house is a more significant issue: it can indicate a failing pressure reducing valve (PRV), significant internal corrosion narrowing your main supply line, a partially closed main shutoff valve, or in older homes, widespread galvanized pipe deterioration. We'll check pressure at multiple points to diagnose which situation you're dealing with.

A drain snake (auger) physically punches a hole through a blockage - it's effective for simple clogs but leaves the pipe walls coated with whatever caused the blockage. Hydro jetting uses water at up to 3,500 PSI delivered through a specialized nozzle to scour the pipe walls completely clean - cutting through grease, mineral scale, and even tree roots. The result is a pipe that flows like it was newly installed. Hydro jetting is recommended when you have recurring blockages (meaning the root cause wasn't eliminated), visible grease buildup on a camera inspection, or root intrusion that's partially obstructing flow.