Plumber in Fort Calhoun, NE

Skip the store-bought drain chemicals. Here's why: chemical cleaners generate heat that can warp PVC fittings, they rarely reach deep blockages effectively, and they create a hazardous situation for any plumber who works on the drain afterward. More importantly, a slow drain is often an early sign of a deeper problem - tree root intrusion in the main line, improper pipe slope from settling, or significant grease buildup that will eventually cause a full backup. A plumber can camera-inspect the drain and tell you exactly what's there before recommending the right fix.

Yes, and the fix is very different. Low pressure at just one faucet almost always means a clogged aerator (the small mesh screen at the faucet tip) or a partially closed isolation valve under the sink - both are quick, inexpensive fixes. Low water pressure throughout the entire house is a more significant issue: it can indicate a failing pressure reducing valve (PRV), significant internal corrosion narrowing your main supply line, a partially closed main shutoff valve, or in older homes, widespread galvanized pipe deterioration. We'll check pressure at multiple points to diagnose which situation you're dealing with.

Not always. We offer two main approaches: traditional open-cut excavation (which is sometimes the best option for severely deteriorated lines or collapsed pipes), and trenchless methods that don't require major digging. The most common trenchless technique is pipe lining - we thread a flexible liner coated with epoxy through your existing sewer pipe, inflate it, and cure it in place, creating a new pipe inside the old one. This saves your landscaping, driveway, and the cost of restoration. We always perform a camera inspection first to determine which approach is right for your specific situation.

Not necessarily, but you're in the high-risk window. Most 40–50 gallon tank water heaters last 8–12 years. At 11 years, the internal anode rod that prevents tank corrosion has likely deteriorated, meaning your tank is now actively corroding from the inside. Signs it's near the end: you hear popping or rumbling (sediment buildup on heating elements), you get rusty or smelly hot water, or the base of the tank shows any sign of moisture or rust. We recommend a flush and inspection - if the tank is structurally sound, we can extend its life. If not, we'll show you your replacement options with honest pricing.